Huaptec DS33 is a high power digital mobile repeater designed to help mobile operators enlarge their network coverage. The system supports 8 sub-bands and 12 channels, so that the booster
Huaptec DS33 is a high power digital mobile repeater designed to help mobile operators enlarge their network coverage. The system supports 8 sub-bands and 12 channels, so that the booster is adjusted strictly to the bandwidth you need. With SDR technology it’s easy to change the frequency of the necessary sub-bands and channels and adapt your repeater to the new signal conditions.
This digital repeater ais used to cover large spaces up to 6000 sq.m. from indoor areas, such as tunnels, airports, subways, railway stations, shopping malls to rural and busy urban zones.
Choose coverage area your need:
Coverage Area Industr | 6000 m² |
---|---|
Częstotliwość | 800 MHz (4G/LTE), 900 MHz (GSM/EGSM), 1800 MHz (DCS/LTE), 2100 MHz (3G/WCDMA), 2600 MHz (4G/LTE) |
Frequency Range | 832~862MHz (Uplink) 791~821MHz (Downlink), 880~915MHz (Uplink) 925~960MHz (Downlink), 1710~1785MHz (Uplink) 1805~1880MHz (Downlink), 1920~1980MHz (Uplink) 2110~2170MHz (Downlink), 2500~2570MHz (Uplink) 2620~2690MHz (Downlink) |
Max. Gain Industr | 80dB (Uplink) - 83dB (Downlink) |
Max. Output Power Industr | 20dBm (Uplink) - 33dBm (Downlink) |
MGC (Step Attenuation) | ≥ 31dB / 1 dB step, dip switch control |
Gain Flatness | Typical ≤5 dB (P-P) |
Noise Figure @ Max. System Gain | Typical ≤5 dB |
V.S.W.R | Typical ≤2 |
Group Delay | ≤ 8 μs |
Power Supply | Input AC 90~264V, output DC 12V/ 3A |
Input & Output Impedance | 50 ohm |
Indication LEDs | ALC LED |
Local Monitoring | PC via USB or Ethernet Port |
Remote Monitoring | Via SMS or GPRS |
Controlled Parameters | Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc. |
Monitoring Parameters | Gain, Frequency, Repeater ON/OFF, Alarm message, etc. |
Alarm Items | Repeater Failure, DC Failure, ALC Alarm, PLL Failure |
I /O Port Type | N-Female |
Dimension-industr | 355*295*162 mm |
Operating Temperature | -10ºC~+55ºC |
Storage Temperature | -10ºC~+80ºC |
Relative Humidity | 5% - 95% |
Barometric Pressure | 55 kPa -106 kPa |
Environment Conditions | IP40 |
Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.
STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).
STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.
STEP 3. Connect antennas and the booster with cables.
STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.
Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.